Every Powerhold Trowel is built with
precision to meet the demanding requirements of today’s
flooring installer. High quality, stainless steel blades
insure long life and durability. These trowels also
display the Powerhold Logo from just about any angle you look.
From the laser etched logo on the blade, the embossed
logo on the tang and the bright red Powerhold name on the
cushion grip, there’s no way you can miss that these are
Powerhold products through and through. Look through the
list below to find a trowel for your next floor installation.
|
|
||
|
|
||
|
|
|
|
PWR 1
1/16” x 3/32” x
1/16” U Notch Trowel
Stainless Steel Blade
4-1/2” x 11”
Cushion Molded Handle
Use to apply adhesives for:
Sheet Vinyl, Solid Vinyl Sheet, VCT, Vinyl Backed Carpet
Tile
PWR 2
1/8” x 1/8” x
1/16” U Notch Trowel
Stainless Steel Blade
4-1/2” x 11”
Cushion Molded Handle
Use to apply adhesives for:
Carpet
PWR 3
1/8” x 1/8” x
1/8” U Notch Trowel
Stainless Steel Blade
4-1/2” x 11”
Cushion Molded Handle
Use to apply adhesives for:
Carpet
PWR 4
1/8” x 3/16” x
1/8” U Notch Trowel
Stainless Steel Blade
4-1/2” x 11”
Cushion Molded Handle
Use to apply adhesives for:
Carpet, outdoor carpet (Perfect for “Double
Stick” Installations)
PWR 5
1/16” x 1/16” x
1/16” Square Notch Trowel
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 11”
Use to apply adhesives for:
Carpet, felt backed sheet vinyl, solid vinyl sheet, vinyl
composition tile, solid vinyl tile.
PWR 6
1/4” x 1/4”
x1/4” Square Notch Trowel
Stainless Steel Blade
Cushion Molded Handle 4x11
Use to apply adhesives for:
Wood Plank, Thinset and Mortar for Ceramic Tile
PWR 7
1/4” x 3/8” x
1/4” Square Notch Trowel
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 11”
Use to apply adhesives for:
Thinset and Mortar for Ceramic Tile
PWR 8
1/2” x 1/2” x
1/2” Square Notch
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 11”
Use to apply adhesives for:
Thinset and Mortar for Ceramic Tile
PWR 9
3/16” x 5/32” V
Notch
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 11”
Use to apply adhesives for:
Carpet, Outdoor Carpet, Sheet Vinyl, Solid
Vinyl Sheet, VCT, Vinyl Backed Carpet Tile, Solid Vinyl Tile
PWR 10
1/4” x 3/16”
V Notch
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 11”
Use to apply adhesives for:
Ceramic Tile, Rubber and VInyl Wall Base
PWR 11
3/32” x 3/32” x
3/32” Flat V Notch
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 11”
Use to apply adhesives for:
Carpet, Outdoor Carpet, Sheet Vinyl, Solid Vinyl
Sheet, VCT, Vinyl Backed Carpet Tile, Solid Vinyl Tile
PWR 12
1/8” x 1/8” x
1/16” Flat V Notch
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 11”
Use to apply adhesives for:
Carpet, Outdoor Carpet, Sheet Vinyl, Solid Vinyl
Sheet, VCT, Vinyl Backed Carpet Tile, Solid Vinyl Tile
PWR 13
14” Finishing Trowel
Stainless Steel Blade
Cushion Molded Handle 4-1/2” x 14”
Use for: Cement Work,
Floor Prep
